High-Performance IP67 Gigabit Industrial Ethernet Switch for Poe+

Feature

Description/benefit(s)

Certified IP67 rating

The solution is IP67-rated to protect against dust and submersion in water. It meets the most rigorous industrial and safety standards for extreme temperature and vibration, humidity, electromagnetic emissions, and other factors.

Compliant with industrial automation standards

The rugged switch supports EtherNet/IP (CIP) and PROFINET so you can easily integrate it with any Ethernet- based industrial equipment and management system. It also supports Precision Time Protocol (PTP) v2 for demanding synchronized applications.

Easy deployment

With zero-touch discovery using Dynamic Host Control Protocol (DHCP), express setup, and sub-60-second boot- up times, you can easily migrate to all-IP-over-Ethernet networking environment.

Strong endpoint security

Support for the following:

  802.1x

  Port security

  Dynamic port-based authentication using DHCP

  Encrypted administrative traffic

  Centralized authentication

Resiliency

brings recovery mechanisms such as flex links and Resilient Ethernet Protocol (REP) to the factory floor or other industrial site. Profinet MRP ring provides the open standard industrial resiliency.

Manageability

DNATM Center enables centralized automation and assurance at scale with a DNA Essentials 3- or 5-year term-based subscription license.

  The solution is easy for operations staff to configure and manage. Auto Smart Port lets you configure the right Quality of Service (QoS) settings for any port in seconds. It also allows for secure web-based administration and easy integration with your network management system.

Network Address Translation (NAT)

The switches provide line-rate, hardware-enabled static address translation to easily connect complex Layer- 2/machine node networks.

Industrial Power-over-Ethernet (PoE)

Select switch models let you connect and power endpoints with a single cable in compliance with PoE and PoE+ standards.

Removable SD flash memory

With tightly secured swappable hard drives, you can quickly replace switches in the field with minimal disruption.

Platform flexibility

The IE2000 IP67 Series is available with 8, 16, or 24 10/100 Base-T, fixed-configuration Ethernet ports and 2x Gigabit Ethernet ports. It provides M12 D Coded, X Coded, and a mini-change dual-power connector in an industrial-hardened, wall-mountable form factor.

IE-2000-8T67P-G-E Specification

Total Ports

10

100 MB D-code

8

GE X-code ports

2

Manufacturing license

LAN Base

IEEE1588

Yes

NAT

Yes

PoE (+)

Yes

Dimensions (H x W x D)

9.5" x 9.32" x 3.9" (241.7 x 236.7 x 99 mm)

Weight

7.19 lbs. (3.26 kg)

Hardware

  256MB DRAM with ECC memory

  IEEE 1588v2 FPGA

  64MB on-board flash memory

  1GB removable SD flash memory card (optional)

Alarm

  Alarm-one alarm output relay using an M12 A Coded 5 Pin connector (Max. rated: 24VDC @ 1A/48VDC @ 0.5A)

Input voltage supported

 with PoE: 44-57VDC, with PoE+ 50-57VDC

  PWR-IE160W-67-DC=: 18-60VDC, 12A

Power rating

  0.12KVA

Power consumption

  73-84W

Connectors and cabling

Data cable

  Copper 100 Base-T M12 D coded 4-pole (pin) cable connector

  Copper GE M12 X coded-8-pole (pin)-cable connector

Alarm cable

  M12 A-Coded 5-Pin Cable

Console cable

  M12 A Coded 5-Pin connector

Power supply cables

  Power cable for power source, Mini-Change A-Size single-ended cord set, 4 poles, female to pigtail, 16 AWG PVC cable.

  Power cable to IE2000 IP67 switch: Mini-Change A-size double-Ended Cordset, 4 poles male to female. 16 AWG, TPE cable.

  Power cable for AC-DC power source, Mini-change A-size single-ended cord set, 3 pins, female insert on one end to pigtail, 16 AWG PVC cable.

  Power cord from power source to power supply: 2 hole female power cord to open for input DC connector.