Air-Ap1815I-a-K9 Aironet 1815I Series Long Range Wireless Access Point Ethernet Network Ap

Aironet 1815i Access Point Specification

Authentication and security

  Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)

  802.1X, RADIUS authentication, authorization, and accounting (AAA)

  802.11r

  802.11i

Software

   Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 or later

   Mobility Express

Supported WLAN Controllers

   2500 Series Wireless Controllers, 3500 Series Wireless Controllers, Wireless Controller Module for ISR G2, Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, 5500 Series Wireless Controllers, Flex® 7500 Series Wireless Controllers, 8500 Series Wireless Controllers, 9800 series Wireless Controllers,

   Mobility Express

Maximum clients

  Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point

802.11ac

  2x2 single-user/multiuser MIMO with two spatial streams

   ratio combining (MRC)

  20-, 40- and 80-MHz channels

  PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)

  Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)

  802.11 Dynamic Frequency Selection (DFS)

  Cyclic shift diversity (CSD) support

Ethernet ports

  Authentication with 802.1X or MAC filtered

  Dynamic VLAN or per port

  Traffic locally switched or tunneled back to wireless LAN controller

Bluetooth (future availability)

  Integrated Bluetooth 4.1 (including BLE) radio

  Maximum transmit power: 4 dBm

  Antenna gain: 2 dBi

Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.

Available transmit power settings

2.4 GHz

20 dBm (100 mW)

17 dBm (50 mW)

14 dBm (25 mW)

11 dBm (12.5 mW)

8 dBm (6.25 mW)

5 dBm (3.13 mW)

2 dBm (1.56 mW)

-1 dBm (0.78 mW)

5 GHz

20 dBm (100 mW)

17 dBm (50 mW)

14 dBm (25 mW)

11 dBm (12.5 mW)

8 dBm (6.25 mW)

5 dBm (3.13 mW)

2 dBm (1.56 mW)

-1 dBm (0.78mW)

Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.

Integrated antennas

  2.4 GHz, gain 2 dBi

  5 GHz, gain 4 dBi

Interfaces

  1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)

  Management console port (RJ-45)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors

Dimensions (W x L x H)

  Access point (without mounting bracket): 6 x 6 x 1.3 in (150.8 x 150.8 x 33 mm)

Weight

  Access point without mounting bracket or any other accessories: 14 oz (400 g)

Environmental

  Operating

   Temperature: 32° to 104°F (0° to 40°C)

   Humidity: 10% to 90% (noncondensing)

   Max. altitude: 9843 ft (3000 m) @ 40°C

  Nonoperating (storage and transportation)

   Temperature: -22° to 158°F (-30° to 70°C)

   Humidity: 10% to 90% (noncondensing)

   Max. altitude: 15,000 ft (4500 m) @ 25°C

System

  1 GB DRAM

  256 MB flash

  710 MHz quad core

Input power requirements

  Power injector: AIR-PWRINJ5= or AIR-PWRINJ6=

Powering options

  802.3af/at Ethernet switch

  Optional power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)

Power draw

  8.3W (maximum, on PoE)

Physical security

  Torx security screw, included with the access point

Mounting

  Included with the access point: mounting bracket AIR-AP-BRACKET8

Accessories

  Mounting bracket: AIR-AP-BRACKET8= (available as spare)

  Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. Security screws used to secure access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports