| Connector: | RJ45 |
|---|---|
| Model No: | Airengine5762s-11 |
| Warranty: | 1year |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Item | Details |
|---|---|
| Description | AirEngine5762S-12(11ax indoor,2+2 dual bands,smart antenna,BLE) |
| Part Number | 50084988 |
| Model | AirEngine 5762S-12 |
| subseries | AirEngine 5700 |
| First supported version | V200R021C01 |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| GE0/PoE_IN | RJ45 | 10/100/1000M auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input. |
Network cable |
| DC 12V | DC connector | Connects to a 12 V power adapter. |
12 V DC power adapter |
| Ethernet Ports | Power Supply Units | ||
| Connector | RJ45 | Voltage | 100 to 240VAC |
| Data Rate | 10/100Base T | Operating voltage range | 85 to 264VAC |
| Protocols | Modbus TCP | Power holding time | 2 ms min. |
| CAN Port | Digital Outputs | ||
| Baud Rate | 125K bps | Output Type | FET |
| Length | <500 meters | Operating Frequency | 100 Hz |
| Protocols | Custom protocol | On-state Current, Max | 200mA |
| Analog Inputs | Pulse Inputs | ||
| Resolution | 16-bit | Voltage Range | 12V-24V DC |
| Input Range | 4~20mA | Off-state Voltage | 8V DC |
| Input Type | Single ended | Typical Input Current | 5mA 10VDC |
| Input Impedance | 170Ω | Input Frequency | 10KHz with filters off |
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x length: 180 mm x 35 mm (7.09 in. x 1.38 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 95 mm x 280 mm x 250 mm (3.74 in. x 11.02 in. x 9.84 in.) |
| Weight without packaging [kg(lb)] | 0.515 kg (1.135 lb) |
| Weight with packaging [kg(lb)] | 0.890 kg (1.962 lb) |
| Storage | NAND Flash 256 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 11 W |
| Maximum heat dissipation [BTU/hour] | 37.5 BTU/hour |
| Power supply mode |
|
| Rated input voltage [V] | 12 V |
| Input voltage range [V] |
DC: 12 V ± 10% PoE: 802.3af |
| Service port surge protection [kV] |
PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Maximum number of physical ports on the entire device | GE (RJ45) x 1, 10M/100M/1000M auto-sensing |
| Long-term operating temperature [°C(°F)] | -10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | -40°C to +70°C (-40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | -60 m to +5000 m (-196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| BLE | BLE5.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams |
Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in smart antennas |
| Antenna gain |
2.4G: 4 dBi/chain (peak value) 2 dBi (combined gain) 5G: 5 dBi/chain (peak value) 3 dBi (combined gain) BLE: 4 dBi |
| Maximum transmit power |
2.4G: 20 dBm/chain 23 dBm (combined power) 5G: 20 dBm/chain 23 dBm (combined power) BLE: < 10 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | 134 year |
| MTTR [hour] | 0.5 hour |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | No function is limited. |
| 802.3at power supply description | No function is limited. |
| 802.3af power supply description | No function is limited. |
| DC power supply description | No function is limited. |
){kind=link}