Connector: | RJ45 |
---|---|
Model No: | Indoor Wireless Ap |
Warranty: | 1year |
Still deciding? Get samples of US$ 800/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
AirEngine 8760R-X1 and AirEngine 8760R-X1E are next generation, flagship, outdoor Access Points (APs) that fully comply with Wi-Fi 6 (802.11ax) standards. Available with either built-in (AirEngine 8760R-X1) or external (AirEngine 8760R-X1E) antennas, each offers 16 spatial streams, achieving a device rate of up to 10.75 Gbit/s, as well as supporting 8T8R on the 2.4 GHz frequency band.
Model Number
|
AirEngine8760R-X1
|
Installation Type
|
* Wall
* Pole |
Dimensions without packaging (H x W x D) [mm(in.)]
|
Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.)
|
Weight without packaging [kg(lb)]
|
4.15 kg (9.15 lb)
|
Storage
|
NAND Flash 512 MB; NOR Flash 16 MB
|
Console port
|
BLE console
|
Maximum power consumption [W]
|
53.2 (excluding PoE OUT)
|
Maximum heat dissipation [BTU/hour]
|
181.5 (without PoE OUT)
|
Power supply mode
|
PoE
|
Input voltage range [V]
|
PoE: 802.3bt
|
Service port surge protection [kV]
|
6 kA in common mode
|
Maximum PoE output power [W]
|
15.4 W
|
Maximum number of physical ports on the entire device
|
10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing
GE (RJ45) x 1, 10M/100M/1000M auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
Long-term operating temperature [°C(°F)]
|
-40°C to +65°C (-40°F to +149°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F
every time the altitude increases by 300 m.) |
Storage temperature [°C(°F)]
|
-40°C to +85°C (-40°F to +185°F)
|
Long-term operating relative humidity [RH]
|
0% RH to 100% RH
|
Long-term operating altitude [m(ft.)]
|
-60 m to +5000 m (-196.85 ft to +16404.20 ft)
|
Atmospheric pressure [kPa]
|
53kPa - 106kPa ETSI 300 019-2-3
|
Ground
|
Ground
|
Wind resistance
|
67 m/s
|
BLE
|
BLE5.0
|
Radio number
|
2
|
WLAN Products:
Scenario-based access points: