Type: | Wireless |
---|---|
Network Site: | Intermediate Node Routers |
Transfer Rate: | 10/100/1000Mbps |
Still deciding? Get samples of US$ 2000/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
4451 Integrated Services Router, named as ISR4451-X, which supports 2 Enhanced service-module (SM-X) slots, delivers 1 Gbps to 2Gbps aggregate throughput. This router also supports two kinds of DDRM, data plane and control/services plane, which make administrator easy to manage the router.
LED descriptions.
LEDs |
Represents |
Color |
Description |
PSU |
Power Supply Unit (P0 and P1) Status |
Green |
PSU is on and is providing power. |
Amber |
PSU is on but with errors or in a failure condition. |
||
Off |
Power supply is turned off. |
||
GE POE |
Internal PoE Daughter Card Status |
Green |
PSU is installed and providing power |
Amber |
PSU is installed but in a failure condition. |
||
Off |
PSU is off. |
||
FLASH |
System Flash Status |
Blinking Green |
Compact flash/eUSB flash is present and currently being accessed. |
TEMP |
Temperature Status |
Solid green |
All temperature sensors in the system are within acceptable range. |
Amber |
One or more temperature sensors in the system are outside the acceptable range. |
||
Off |
Temperature is not being monitored. |
||
PWR |
System Power |
Green |
System power is on and functioning correctly. |
Green blinking |
System power is in the process of shutting down. |
||
Amber |
System power is up, but low level initialization failed. |
||
Amber blinking |
System power is up, but the system failed to come out of reset. |
||
Off |
System power is off. |
||
POE BOOST |
Power Over Ethernet Boost Mode |
Green |
Two PoE power supplies are installed and operating in boost mode. |
Off |
This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode. |
||
ISC |
ISC Slot Status |
Green |
PVDM4 is present and enabled. |
Amber |
Initialized with error. |
||
Off |
Not present. |
||
FAN |
Fan Status |
Green |
All fans are operating. |
Amber |
One fan has stopped working. |
||
Blinking Amber |
Two or more fans have stopped working, or the fan tray has been removed. |
||
Off |
Fans are not being monitored. |
||
STAT |
System Status |
Solid green |
System operating normally. |
Blinking amber |
BIOS/Rommon is booting. |
||
Amber |
BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. |
||
Off |
System is not out of reset or BIOS image is not loadable. |
ISR4451-X/K9 is one of the 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, ISR4451-X/K9 can upgrade by licenses.
Table 3 shows some recommended modules, cards, licenses and several cables.
Items |
Models |
Descriptions |
Console and Auxillary Cables |
CAB-AUX-RJ45 |
CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
CAB-ETH-S-RJ45 |
Router Cable CAB-ETH-S-RJ45 |
|
CAB-CONSOLE-RJ45 |
CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F |
|
CAB-CONSOLE-USB |
CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B |
|
Licenses |
L-SL-44-APP-K9= |
ISR 4431/4451 AppX license L-SL-44-APP-K9= with WAAS/vWAAS 1300/2500 conns RTU |
Network Interface Modules |
NIM-1MFT-T1/E1 |
Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
NIM-2CE1T1-PRI |
Multiflex Trunk Voice and WAN network interface module |
|
NIM-4E/M |
Analog voice network interface card (ear and mouth) |
|
NIM-2FXS |
Analog voice network interface card NIM-2FXS |
|
NIM-2FXS/4FXO |
Analog voice network interface card NIM-2FXS/4FXO |
|
NIM-8MFT-T1/E1 |
Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
|
SFPs for On-Board GE Ports |
GLC-SX-MMD |
GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
GLC-LH-SMD |
GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM |
|
GLC-ZX-SMD |
GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Technical Specifications |
ISR4461/K9 |
ISR4451-X/K9 |
ISR4431/K9 |
ISR4351/K9 |
ISR4331/K9 |
ISR4321/K9 |
ISR4221/K9 |
Aggregate Throughput |
1.5Gbps |
1 Gbps to 2 Gbps |
500 Mbps to 1 Gbps |
200 Mbps to 400 Mbps |
100 Mbps to 300 Mbps |
50 Mbps to 100 Mbps |
35 Mbps to 75 Mbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 |
4 |
4 |
3 |
3 |
2 |
2 |
RJ-45-based ports |
4 |
4 |
4 |
3 |
2 |
2 |
2 |
SFP-based ports |
4 |
4 |
4 |
3 |
2 |
1 |
1 |
Enhanced service-module slots |
3 |
2 |
0 |
2 |
1 |
0 |
0 |
Doublewide service-module slots |
2 |
1 (assumes no singlewide SM-X modules installed) |
0 |
1 (assumes no singlewide SM-X modules installed) |
0 |
0 |
0 |
NIM slots |
3 |
3 |
3 |
3 |
2 |
2 |
2 |
OIR (all I/O modules) |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
No |
Onboard ISC slot |
1 |
1 |
1 |
1 |
1 |
1 |
No |
ISR4451-X/K9 Specification |
|
Aggregate Throughput |
1 Gbps to 2Gbps |
Total onboard WAN or LAN 10/100/1000 ports |
4 |
RJ-45-based ports |
4 |
SFP-based ports |
4 |
Enhanced service-module slots |
2 |
Doublewide service-module slots |
1 (assumes no singlewide SM-X modules installed) |
NIM slots |
3 |
OIR (all I/O modules) |
Yes |
Onboard ISC slot |
1 |
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) |
NA |
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) |
NA |
Default memory DDR3 ECC DRAM (data plane) |
2 GB |
Maximum memory DDR3 ECC DRAM (data plane) |
2 GB |
Default memory DDR3 ECC DRAM (control/services plane) |
4 GB |
Maximum memory DDR3 ECC DRAM (control/services plane) |
16 GB |
Default flash memory |
8 GB |
Maximum flash memory |
32 GB |
External USB 2.0 slots (type A) |
2 |
USB console port -type B mini (up to 115.2 kbps) |
1 |
Serial console port - RJ45 (up to 115.2 kbps) |
1 |
Serial auxiliary port - RJ45 (up to 115.2 kbps) |
1 |
Power-supply options |
Internal: AC, DC and PoE |
Redundant power supply |
Internal: AC, DC and PoE |
AC input voltage |
100 to 240 VAC autoranging |
AC input frequency |
47 to 63 Hz |
AC input current range, AC power supply (maximum) |
7.1 to 3.0A |
AC input surge current |
<50 A |
Typical power (no modules) (watts) |
158 |
Maximum power with AC power supply (watts) |
450 (no PoE) |
Maximum power with PoE power supply (platform only) (watts) |
1000 with PoE redundant 1450 with PoE boost no redundancy |
Maximum endpoint PoE power available from PoE power supply (watts) |
500 W with optional redundancy |
Maximum endpoint PoE power capacity with PoE boost (watts) |
950 W no redundancy |